For optimum control of Davies, Craig 12 Volt and 24 Volt Electric Water Pumps.
Suits EWP®80, EWP®115, EWP®130, EWP®150, Thermatic® / Electric Fans and billeted style Electric Water Pumps.

The updated controller offers enhanced rounded appearance, slimmer and the seven-pin plug is now safely tucked away, out of sight at the base of the Controller.
 

The EWP®/Fan Digital Controller has two specific functions:
Will manage the operation of the EWP® by varying the speed of the pump in response to the coolant temperature & also manage control of your electric engine fan.

The Controller has a push-button to lock in any temperature from 40°C (104°F) to 110°C (230°F). It’s recommended you set/target the Controller to closely match your engine’s existing thermostat temperature.

The Digital Controller will operate the engine’s electric fan automatically once the engine has reached +3°C (+5.4°F) above the targeted / set temperature. Another significant benefit is that the Controller allows the EWP® & Fan to run on after ignition shutdown for either 3 minutes or -10°C (-14°F) of set set / target temperature to eliminate heat soak.

Kit Contents:
 EWP® Digital Controller Assembly    1
 Wiring Harness (includes 10AMP fuse)  1
 Temp Sensor 1/4 NPT 1
 In-Line Adaptor (35mm ends - hose size fitting) 1
 Hose Clamps 2
 Ring Terminal 1
 Rubber Sleeves 3mm 2
 Mounting Options: Velcro, Nylon Plate, Bracket 3
 Instructions 1

Specifications:
Voltage range     12V DC to 29V DC
Display LCD size     64.6mm (2.54”) x 55.6mm (2.19”)
Maximum current     12Amps

Warning alarm:
High & low Temp, Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit

Targeted (set) temperatures: 40°C (104°F) to 110°C (230°F)
Memory     Set & targeted temperature
Fan cut-in temp.     3°C (5.4°F) above the targeted (set) temperature
Controller type     PCB with micro-processor
Sensor type     Thermister in housing
Overrun/ shutdown     -10°C (14°F) below set/target temperature or 3 minutes

Indicators:
Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Weight     135 grams

Dimensions:
Length = 98mm (3.8")
Width = 95mm (3.7")
Depth = 25mm (1”)